Fullex plasma cutter CUT 160A Cutting power up to 50 mm.

Item number: Fullex-CUT-160A

The powerful plasma cutter for perfect cutting results in metalworking
The Fullex Plasma Cut 160 consists of a power source, handpiece, ground cable, power supply and compressed air supply. The powerful plasma cutter Cut 160 cuts metals precisely and easily by means of an electric arc. The Cut 160 plasma cutter produces an arc and thus generated electrically conductive gas with temperatures of about 10,000 to 15,000 ° C. The arc is ignited by a high-frequency ignition. The Fullex Cut 160 used for this purpose, the lift-arc ignition according to the TIG welding equipment.

Category: Plasma Cutter


1.999,00 €

including 19% VAT., plus shipping (Paket bis 50kg)

Available now!

Shipping time: 2 - 5 workdays



Description

Professional equipment for everyday use
STABILITY FOR MAXIMUM PERFORMANCE - CUTTING UP TO 50mm possible !!!

Item Description

CUT 160 plasma cutter 160 Amper
With an inverter technology of the CUT-160 is a plasma cutter profiles. The device achieves a DC (duty cycle) of 60% at full power.

Air plasma cutter CUT-160
Cutting performance: high, cutting width: Small, Cutting speed: high, cutting Quality: High
Very stable and accurate arc.
For plasma cutting DC, an air compressor with 4.5 bar is required, and is suitable for unalloyed, low-alloy and high-steel, titanium, aluminum, copper, zirconium, etc.
All conductive metals as Standard steel, stainless steel, brass, aluminum, titanium, etc. can be cut with CUT-160th

CUT 160 plasma cutting guaranteed by the high heat an even-toned neck, small cut seams and the workpiece is deformed low.
The cutting power is between 20 amps and 160 amps continuously adjustable.


The powerful plasma cutter for perfect cutting results in metalworking
The Fullex Plasma Cut 160 consists of a power source, handpiece, ground cable, power supply and compressed air supply. The powerful plasma cutter Cut 160 cuts metals precisely and easily by means of an electric arc. The Cut 160 plasma cutter produces an arc and thus generated electrically conductive gas with temperatures of about 10,000 to 15,000 ° C. The arc is ignited by a high-frequency ignition. The Fullex Cut 160 used for this purpose, the lift-arc ignition according to the TIG welding equipment. At the interface of the burner which is placed on the workpiece, a small current flows, so that the burner is not damaged. The intelligent and high-quality electronics of the power source increases the current to the strength required for the cut. The edges at the entry point of the plasma are rounded and thus ensure perfect cutting results.
The Fullex CUT 160 achieved by the high-performance technology, a higher duty cycle at 160 amps of 60%.

advantages

  • New inverter technology is characterized by many advantages, such as Energy efficient, smooth regulation and many other features.
  • Absolutely safe and reliable
  • Optimum size and weight for use on construction sites. Very compact and practical
  • FULLEX CUT 160 High performance and very good quality by the new inverter technology
  • FULLEX CUT 160 with inverter technology provides for .B. smaller volume, reduced weight, continuously variable, up to 30% energy saving.
  • HF ignition produces perfect Schweißgutübergang.
  • Automatic Hot-Start function optimal igniting all stick electrodes.
  • Many uses for industry, craft and Pivatbereich.
  • Precise cutting in High cutting speed
  • Certified according to European CE standard
  • To cut a simple air compressor with 6.5 bar is required, therefore you save expensive gas.
  • scope of application

FULLEX plasma cutters are individually varied einsatzbar eg Private, hobby and crafts area as cars, trucks, classic cars, model making, stair and balcony railings, or in professional and industrial sectors such as metal, locksmith services, aircraft, garden, landscaping and welding schools. Fullex plasma cutter is suitable for very high quality requirements.


All important parameters directly accessible:

  • Switch in the handle integrated (comparable models work with cable ties).
  • Digital display.
  • Cutting capacity up to 50 mm, depending on the material:
  • You have material is what to cut? Visit us and we will demonstrate the power of CUT 160 A.
  • The device uses a high-frequency ignition, without contact with the workpiece. (Advantage: more precise and faster cutting).
  • PILOT - ignition.
  • Small cutting width.
  • High cutting speed.
  • CNC suitable.
  • Good cutting quality.
  • High-quality nozzles and electrodes.
  • 60% duty cycle at 160 A.
  • Duty cycle 100% at 90 A.
  • The cutting power is between 20 and 120 A continuously variable.
  • Due to the small deformation thin sheets can immediately be welded together again.
  • Accurate and very stable arc. Perfect for cutting oil tanks, tubs, or similar body.
  • The device is immediately ready for use upon delivery.

Technische Daten:

Mains voltage:AC 400 V 50/60 Hz
Idle Power:323 Volt
Output Current:160 A
Output Current V:144 Volt.
Duty cycle at 160 A:60%
Duty cycle at 90 A:100%
Output current:20 - 160 A
Cutting thickness:1 - 50 mm
Cutting width:1,2 mm
Air pressure:4 - 6 Bar
Air flow:180 L /Min
Arc rash:HF- Hochfrequenz
Weight:55 Kg
Dimensions L × B × H (mm):670 × 330 × 620
Insolation Class:IP 21


 

Delivery

  • The device PLASMA CUT 160 A.
  • Assistance with spacers.
  • Plasma hose package "P-80" 4.50 meters.
  • Plasma accessories set 13 pieces (of which 1 piece already installed in the hose package):
  • 5 nozzles.
  • 5 electrodes for plasma.
  • Ceramic caps.
  • Ground cable 3 meters.
  • Water separator with pressure gauge.
  • Connecting tube: 3 meters.
  • Operating instructions in German.

Shipping weight:70,00 kg
Product weight:65,00 kg
Dimensions:84 × 66 × 46 cm

Recommend item

Recommend item


Product Tags

Please login first to add a tag.


Other customers have also bought the following items